Mitel 6800 Series Administrator's Manual page 655

BROADSOFT BROADWORKS REMOTE OFFICE SUPPORT
Note: This service is applicable to the 6867i, 6869i, and 6873i SIP Phones.
The BroadSoft BroadWorks Remote Office service is supported by the 6800 series SIP phones.
The BroadWorks Remote Office service allows users the ability to use any remote end-point
device as their office phone. Users can define a remote office number or SIP-URI whereby all
incoming calls to their SIP phone will be automatically forwarded to the defined remote office
number/SIP-URI.
To specifically enable Remote Office support on the phone, Administrators must define the "xsi
remote office" parameter in the respective configuration file as "1". When enabled, users have
the ability to enable and disable Remote Office functionality as well as change the Remote
Office number/SIP-URI through the phone's native UI.
Configuring the Remote Office Service Using the Phone UI
IP PHONE UI
Use the following procedure on the phone's UI to configure Remote Office service.
For the 6867i/6869i:
1. Press on the phone to enter the Options List.
2. Navigate to the BroadSoft Call Settings > Remote Office option and press the
or Select softkey.
3. In the Remote Office field press the 3 or 4 key enable or disable the service.
4. Press the 2 key to highlight the Phone Number/SIP-URI field and using the dialpad keys
enter the phone number or SIP-URI you want all incoming calls to be forwarded to.
5. Press the Save softkey to save your changes.
6869i Example
Advanced Operational Features
button
6-66