Mitel 6800 Series Administrator's Manual page 540

Mitel 6800 Series SIP Phone Release 4.2.0 SP2 Administrator Guide
Entering Username/Passwords and Testing Connections Using the Phone UI
Use the following procedure on the phone's UI to enter user credentials (and for the 6867i,
6869i, and 6873i, test the connection to an external source).
IP PHONE UI
For the 6863i/6865i:
1. Press the
2. Select Credentials.
3. Use the 5 and 2 keys to navigate through the list of Directory sources and select 4 Enter.
4. Press the 2 key to navigate to the Enter Username screen and select 4 Enter.
5. Using the dialpad keys, enter in your username and select 4 Set.
6. Press the 2 key to navigate to the Enter Password screen and select 4 Enter.
7. Using the dialpad keys, enter in your password and press the
For the 6867i/6869i:
1. Press
2. Navigate to the Credentials option and press the
3. Use the 3 and 4 keys to navigate to the desired Directory source tab (e.g. LDAP, Microsoft
Exchange, BroadSoft Xsi).
4. Press the 2 key to highlight the Username field and using the dialpad keys enter in the
username applicable to the Directory source.
5. Press the 2 key to highlight the Password field and using the dialpad keys enter in the
password applicable to the Directory source.
6. Press the 5 key to navigate to the respective Directory source tab and repeat Steps 3 to
5 for any other sources you want to configure.
7. Press the 5 key to navigate to the respective Directory source tab, and press the 4 key
until you get to the Test Connection tab.
8. Highlight the respective directory source and press the
source.
9. Press the Test softkey to begin testing.

A green
A red ! will appear if issues are found.
If there are issues with your connection, please check your username, password, and/or
server configuration.
10. Press the Save softkey to save your changes.
5-277
key on the phone to enter the Option List.
on the phone to enter the Options List.
will appear if there are no issues with the connection to the server.
button or select 4 Set.
button or Select softkey.
button to enable testing on that