Customizable Message Waiting Indicator (Mwi) Request Uri - Mitel 6800 Series Administrator's Manual

Mitel 6800 Series SIP Phone Release 4.2.0 SP2 Administrator Guide
CUSTOMIZABLE MESSAGE WAITING INDICATOR (MWI) REQUEST
URI
In Release 3.1 and up, an Administrator can enter a parameter in the configuration files to
customize the request-URI for MWI feature subscription. This parameter is called "sip linex
mwi request uri".
This feature can be set on a per-line basis using the configuration files only.
Note: "Sip Explicit MWI Subscription" must be enabled to use this feature. For more
information about the Sip Explicit MWI Subscription" parameter, see
Settings (optional)"
CONFIGURING MESSAGE WAITING INDICATOR (MWI) REQUEST URI
Use the following procedure to configure an MWI request URI on the IP phone.
CONFIGURATION FILES
For the specific parameter you can set in the configuration files, see Appendix A, the section,
"Message Waiting Indicator Settings"
DND KEY MODE
The IP phones have a feature you can enable called "Do not Disturb (DND). An Administrator
or User can set "do not disturb" based on the accounts on the phone (all accounts or a specific
account). You can set specific modes for the way you want the phone to handle DND. The three
modes you can set on the phone for DND are:
• Account
• Phone
• Custom
An Administrator or User can set the DND mode using the Mitel Web UI at the path Basic
Settings->Preferences->General->DND Key Mode. An Administrator can also set the DND Key
Mode using the configuration files.
Note: You must configure a DND key on the phone to use this feature.
REFERENCE
For more information about how DND works and how you can use it on the phones, see the
section, "Do Not Disturb (DND)"
CONFIGURING THE DND KEY MODE
Use the following procedures to set the DND Key Mode on the phone.
5-95
on page 4-79.
on page A-184.
on page 5-198.
"Advanced SIP