Mitel 6800 Series Administrator's Manual page 404

Mitel 6800 Series SIP Phone Release 4.2.0 SP2 Administrator Guide
SOFTKEYS
The following table provides the number of softkeys you can configure, and the number of lines
available for each phone model that has configurable softkeys.
IP PHONE MODEL
6867i
6869i
6873i
*The M680i expansion module consists of 16 softkeys. You can have up to 3 expansion modules
on an IP phone totalling 48 softkeys. Valid for 6865i, 6867i, 6869i and 6873i phones.
**The M685i expansion module consists of 3 pages of 28 softkeys (for a total of 84). You can
have up to 3 expansion modules on an IP phone totalling 252 softkeys. Valid for 6865i, 6867i,
6869i, 6873i phones.
STATE-BASED SOFTKEYS (BOTTOM SOFTKEYS ONLY)
Users and administrators can configure a specific state to display when a softkey is being used.
Available states you can configure for each softkey include:
• idle - The phone is not being used.
• connected - The current line is in an active call (or the call is on hold)
• incoming - The phone is ringing.
• outgoing - The user is dialing a number, or the far-end is ringing.
• busy - The current line is busy because the line is in use or the line is set as "Do Not Disturb".
5-141
SOFTKEYS EXPANSION MODULE KEYS
6 top (maximum of 16 to 48*
20 functions)
(Model M680i)
4 bottom
(maximum of 18
84 to 252**
functions)
(Model (M685i)
12 top (maximum 16 to 48*
of 44 functions)
(Model M680i)
5 bottom
(maximum of 24
84 to 252**
functions)
(Model (M685i)
12 top (maximum 16 to 48*
of 48 functions)
(Model M680i)
6 bottom
(maximum of 30
84 to 252**
functions)
(Model (M685i)
LINES AVAILABLE
24
24
24