Mitel 6800 Series Administrator's Manual page 283

The following table identifies the additional time zone and DST parameters you can enter in
the configuration files.
CUSTOM
CONFIGURATION
FILE PARAMETER
time zone minutes
dst minutes
dst start relative date
dst end relative date
ABSOLUTE TIME (NOT APPLICABLE TO EASTERN STANDARD TIME (EST))
dst start month
dst end month
dst [start |end] week
dst start day
dst end day
dst start hour
dst end hour
RELATIVE TIME
dst start month
dst end month
DESCRIPTION
The number of minutes the time zone is
offset from UTC (Coordinated Universal
Time). This can be positive (West of the
Prime Meridian) or negative (East of the
Prime Meridian). The default is Eastern
Standard Time (EST) with a value of 300
(GMT minus 5 hours).
The number of minutes to add during
Daylight Saving Time. Valid values are a
positive integer between 0 to 60.
Specifies how to interpret the start and
end day, month, and week parameters -
absolute (0) or relative (1).
The month that DST starts. Valid values
are 1 to 12 (January to December).
The month that DST ends. Valid values
are 1 to 12 (January to December).
Not applicable to absolute time.
The day of the month that DST starts.
Valid values are 1 to 31.
The day of the month that DST ends.
Valid values are 1 to 31.
The hour that DST starts. Valid values
are an integer from 0 (midnight) to 23.
The hour that DST ends. Valid values
are an integer from 0 (midnight) to 23.
The month that DST starts. Valid values
are 1 to 12 (January to December).
The month that DST ends. Valid values
are 1 to 12 (January to December).
Operational Features
EXAMPLE
time zone minutes: 300
Note: For additional values for
this parameter, see "Custom
Time Zone and DST Settings"
on page A-53.
dst minutes: 60
dst start relative date: 1
dst end relative date: 1
dst start month: 3
dst end month: 4
N/A
dst start day: 15
dst end day: 31
dst start hour: 5
dst end hour: 23
dst start month: 4
dst end month: 5
5-20