Line Settings - Mitel 6800 Series Administrator's Manual

Mitel 6800 Series SIP Phone Release 4.2.0 SP2 Administrator Guide

LINE SETTINGS

An administrator can configure multiple lines on the IP phone with the same SIP network
configuration (global) or a different SIP network configuration (per-line). The following table
provides the number of lines available for each IP phone model.
IP PHONE MODEL
6863i
6865i
6867i
6869i
6873i
On the IP Phones, you can configure the following on a per-line basis using the configuration
files or the Mitel Web UI:
• Basic SIP Authentication Settings
• Basic SIP Network Settings
• RTP Settings (DTMF Method and RTP Encryption only)
• Autodial Settings (On a per-line basis, you can also enable/disable the "Use Global
Settings" parameter).
• Additional Settings (Missed Calls only [i.e. configure missed calls indicator applicability
for specific lines]).
REFERENCES
For more information about configuring the features listed above on a per-line basis, see the
sections:
• "Basic SIP Settings"
• "Advanced SIP Settings (optional)"
• "Real-time Transport Protocol (RTP) Settings"
• "Autodial Settings"
• "Missed Calls Indicator"
3-63
on page 4-60
on page 4-79
on page 4-98
on page 258
AVAILABLE LINES
2
24
24
24
24
on page 4-85