Conference/Transfer In Live Dial Mode - Mitel 6800 Series Administrator's Manual

Mitel 6800 Series SIP Phone Release 4.2.0 SP2 Administrator Guide

CONFERENCE/TRANSFER IN LIVE DIAL MODE

PARAMETER –
confxfer live dial
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
HTTP/HTTPS AUTHENTICATION SUPPORT FOR BROADSOFT CMS
PARAMETER –
http digest username
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
A-96
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
Enables/disables support for live dial mode when initiating a
conference call or transfer.
Integer
0
0 - Pre-dial mode: When a user initiates a conference call or transfer,
they do not hear a dial tone before dialing begins. The phone does
not automatically dial out the number until the user presses the
"Conf" or "Xfer" key.
1 - Live dial mode with dial plan matching: When a user initiates a
conference call or transfer, they hear a dial tone before dialing
begins. The phone automatically dials out if the number matches the
local dial plan or if it reaches the set digit timeout.
2 - Live dial mode without dial plan matching: When a user initiates
a conference call or transfer, they hear a dial tone before dialing
begins. The phone does not match the number to the local dial plan
and automatically dials out only if it reaches the set digit timeout (or
if the number matches a number defined in the emergency dial plan).
confxfer live dial: 2
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
Specifies the username to use for HTTP/HTTPS digest
authentication.
The server uses this username for authentication purposes when
loading configuration to the phone over HTTP/HTTPS. This
parameter initiates a "Username/Password" screen after pressing
the Log In softkey.
Notes:
• The Username field accepts special characters, such as, @, #, %,
=, _, etc. You can also specify domain names (i.e. user@domain).
• You must reboot the phone after setting the HTTP/HTTPS digest
authentication parameters.
String
aastra
Up to 40 alphanumeric characters
http digest username: myusername