Audio Mode Settings - Mitel 6800 Series Administrator's Manual

Mitel 6800 Series SIP Phone Release 4.2.0 SP2 Administrator Guide
Example
The following is an example of configuring RTP streaming for Paging applications using the
configuration files:
paging group listening: 224.0.0.2:10000,239.0.1.20:15000
softkey1 type: paging
softkey1 label: group 1
softkey1 value: 224.0.0.2:10000

AUDIO MODE SETTINGS

PARAMETER –
audio mode
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
A-212
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
Allows you to configure how the "handsfree" button on the IP phone
operates.
Integer
0
0. Speaker - This is the default setting. Calls can be made or
received using the handset or handsfree speakerphone. In handset
audio mode, pressing the handsfree button on the phone switches to
handsfree speakerphone. In Speaker audio mode, lift the handset to
switch to the handset.
1. Headset - Choose this setting if you want to make or receive all
calls using a handset or headset. For the 6865i, 6867i, 6869i, and
6873i, calls can be switched from the handset to headset by pressing
the handsfree button on the phone. To switch from the headset to the
handset, lift the handset.
2. Speaker/Headset - Incoming calls are sent to the handsfree
speakerphone first when the handsfree button is pressed. By
pressing the handsfree button again, you can switch back and forth
between the handsfree speakerphone and the headset. For the
6865i, 6867i, 6869i, and 6873i lifting the handset at any time
switches back to the handset from either the handsfree
speakerphone or the headset.
3. Headset/Speaker - Incoming calls are sent to the headset first
when the handsfree button is pressed. By pressing the handsfree
button again, you can switch back and forth between the headset
and the handsfree speakerphone. For the 6865i, 6867i, 6869i, and
6873i lifting the handset at any time switches back to the handset
from either the headset or the handsfree speakerphone.
audio mode: 2