Call Waiting Tone Period - Mitel 6800 Series Administrator's Manual

Hide thumbs Also See for 6800 Series:

Table of Contents

2. The "Play Call Waiting Tone" field is enabled by default. To disable this field, uncheck the

box. This feature allows you to enable or disable the call waiting tone on the IP phone.

Note: The Call Waiting Tone feature works only if the "Call Waiting" tone field is

enabled at the location Advanced Settings->Global SIP (or Line X)->Basic SIP

Authentication Settings.

3. Click Save Settings to save your changes.

CALL WAITING TONE PERIOD

A User or Administrator can specify a specific time period (in seconds) for the call waiting tone

to play at regular intervals on an active call using the parameter "call waiting tone period". A

value of "0" is the default and plays the call waiting tone only once on the active call. When the

incoming caller hangs up, the call waiting tone stops on the existing active call.

You can enable or disable this feature in the configuration files or in the Mitel Web UI.

Configuring "Call Waiting Tone Period"

You use the following procedures to enable or disable "Call Waiting Tone Period".

CONFIGURATION FILES

For specific parameters you can set in the configuration files, see Appendix A, the section,

Waiting Settings"

Operational Features

Show Quick Links

Table of Contents