Mitel 6800 Series Administrator's Manual page 486

Mitel 6800 Series SIP Phone Release 4.2.0 SP2 Administrator Guide
On the 6867i, 6869i, and 6873i IP Phone UIs
• When a call comes in, and you pickup the handset, the custom label that you configured
for the park softkey displays on the Phone UI.
• After the call is parked, the label that you configured for the pickup softkey displays on other
phones in the network. You can then press the pickup softkey, followed by the applicable
value to pickup the call on another phone in your network.
Note: When using the MiCloud Telepo for Service Providers method of call park/pickup,
the Park and Pickup softkeys will be displayed on the phone at all times.
On the 6863i and 6865i IP Phone UIs
When a call comes in, and you pickup the handset, you can press the applicable programmable
key configured with park functionality to park the call.
After the call is parked, you can press the programmable key configured with pickup
functionality, followed by the applicable value to pickup the call.
Configuring Park/Pickup Key Using Configuration Files
In the configuration files, you configure the park/pickup keys using the key parameters. You
also must specify the "sip lineN park and pickup config" parameter for all applicable servers
except when using the MiCloud Telepo for Service Providers call manager.
For the MiCloud Telepo call manager, two keys configured with BLF/Xfer functionality (one
defined as "myCalls" and the other as "callPark") facilitates the call park/retrieve method. When
the first BLF/Xfer key (defined as "myCalls") is pressed, the phone will subscribe to the
myCalls@<domain>.com URI and users will be able to pick up any authorized calls. Pressing
the second BLF/Xfer key (defined as "callPark") will transfer the active call to the
callPark@<domain>.com URI (i.e. the park device)
The following examples show park/pickup configurations using specific servers.
Examples for 6867i, 6869i, and 6873i
SERVER
Asterisk
Sylantro
5-223
PARK CONFIGURATION
softkeyN type: park
softkeyN label: parkCall
softkeyN states: connected*
sip lineN park pickup config:
70;70;asterisk
softkeyN type: park
softkeyN label: parkCall
softkeyN states: connected*
sip lineN park pickup
config:*98;*99;sylantro
PICKUP CONFIGURATION
softkeyN type: pickup
softkeyN label: pickupCall
softkeyN states: idle, outgoing**
sip lineN park pickup config:
70;70;asterisk
softkeyN type: pickup
softkeyN label: pickupCall
softkeyN states: idle, outgoing**
sip lineN park pickup config:
*98;*99;sylantro