Mitel 6800 Series Administrator's Manual page 843

PARAMETER –
sip transport protocol
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
PARAMETER –
sip registration retry timer
Description
FORMAT
Default Value
Range
Example
Operational, Basic, and Advanced Parameters
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
The protocol that the IP phone uses to send out SIP messages.
Notes:
• If you set the value of this parameter to 4 (TLS), the phone checks
to see if the "sips persistent tls" is enabled. If it is enabled, the
phone uses Persistent TLS on the connection. If "sips persistent
tls" is disabled, then the phone uses TLS on the connection. If
TLS is used, you must specify the Root and Intermediate
Certificates, the Local Certificate, the Private Key, and the
Trusted Certificates.
• If the phone uses Persistent TLS, you MUST specify the Trusted
Certificates; the Root and Intermediate Certificates, the Local
Certificate, and the Private Key are optional.
• This parameter implies keep-alive mechanism.
For more information about Persistent TLS, see
Security (TLS) Settings" on
Integer
1 (UDP)
Valid values are:
0 - User Datagram Protocol (UDP) and
Transmission Control Protocol (TCP)
1 - UDP
2 - TCP
4 - Transport Layer Security (TLS)
sip transport protocol: 4
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
Specifies the time, in seconds, that the phone waits between
registration attempts when a registration is rejected by the registrar.
Integer
1800 (30 minutes)
30-1800
sip registration retry timer: 30
"Transport Layer
page A-106.
A-101