Mitel 6800 Series Administrator's Manual page 447

CONFIGURING THE BLF/XFER KEY AND THE SPEEDDIAL/XFER KEY US-
ING THE MITEL WEB UI
You configure the BLF/Xfer key and/or the Speeddial/Xfer Key on the IP phone similar to
configuring a BLF key or Speeddial key using the Mitel Web UI. Use the following procedure
to configure BLF/Xfer and/or Speeddial/Xfer.
MITEL WEB UI
1. Click on Operation->Softkeys and XML.
or
Click on Operation->Programmable Keys.
or
Click on Operation->Expansion Keys.
2. Choose a key that you want to assign the BLF/Xfer key or a Speeddial/Xfer key to, and
select BLF/Xfer or Speeddial/Xfer from the "Type" field.
3. In the "Label" field, enter a key label to assign to the BLF/Xfer key (for example, "BX35").
4. In the "Value" field, enter the monitored extension (for example, "35").
5. In the "Line" field, select the line for which you want to use the key functionality.
6. Select the state(s) (idle, connected, incoming, outgoing, busy) for which you want to use
on the key.
Note: States are not applicable to programmable keys.
7. Click Save Settings to save your changes.
Operational Features
5-184