Putting A Call Partner On Hold; Parking Conversation Partner - Mitel 6940 User Manual

C 4
HAPTER
Per call
You must save this function to a configurable key using Self Service Portal (see chapter
deleting a key assignment").
:
NOTE
• Your call number can only be hidden if you select an external call number.
• This feature depends on the range of services offered by your provider.

Putting a call partner on hold

You want to briefly interrupt the active call.
You can put the call party on hold and then take them back again on the same phone.

Parking conversation partner

You would like to keep the person you are talking to on hold without blocking a phone line.
U
SING FUNCTIONS BEFORE
Call number should only be restricted for certain
calls. This function must be activated before
dialing the call number.
Activating/deactivating calling line
identification restriction permanently:
Press the function key for Hide number.
→ Function is activated/deactivated. You phone
number is hidden in all outgoing calls.
Activating CLIR per call:
Press the function key for Hide number.
1.
Enter the call number and press the Select
2.
softkey.
→ Call number is dialed and your number is
not displayed to the called party.
Putting the active call party on hold:
Press the Hold key.
→ The call party is put on hold, is displayed and
the LED of the line key flashes.
Take back the call party on hold:
Press the Hold key, the flashing line key, or the
Pick up softkey.
→ The call is active again.
/
WHILE IN A CALL
P
HONING
"Configuring or
38