Table of Contents
Advertisement
During the call
Using the mute function
The call is phone up with a party and you want to have a confidential conversation without
the party being able to hear it.
Placing a party on hold and resuming the call on the same phone
The call is set up with a party and you want to put it on hold to resume it later on the same
phone.
1st method:
Key 1
2nd method:
Hold
Recover
To deactivate the microphone:
• Press the microphone key.
-> The microphone is deactivated and the
in the first line of the screen.
To reactivate the microphone :
• Press the microphone key again.
-> The
symbol is no longer displayed, which means that your
contact can hear you again.
The multi-key function can be activated on almost one
programmable key. For more detailed information on how to
program the multi-key function, refer to the following chapter:
"Multi-key function", page 45.
Press the key programmed in multi-key mode (the indicator lights
up). This indicator starts to flash and your contact is put on hold.
To resume your call, press this key again.
The on-hold function can be activated on a programmable key.
For more detailed information on how to program the on-hold
function, refer to the following chapter: "On-hold function",
page 81.
1 - Press the programmed on-hold key. This indicator starts to
flash and your contact is put on hold.
2 - To resume your call, press the
symbol is shown
Recover
Fox key
.
19
Advertisement
Table of Contents
