Applying Ip Filter Policies To Network Interfaces - Alcatel-Lucent 7705 Configuration Manual

Common Configuration Tasks
The following example displays an IP and MAC filter assignment for a VPLS service
configuration:
A:ALU-48>config>service>vpls# info
----------------------------------------------
...
...
----------------------------------------------
A:ALU-48>config>service>vpls#

Applying IP Filter Policies to Network Interfaces

IP filter policies can be applied to ingress and egress network IP interfaces.
IPv4 filters are supported on all ingress and egress network interfaces. IPv6 filters are
supported on all Ethernet ingress and egress network interfaces (with null or dot1q
encapsulation) and on ingress and egress interfaces on the 4-port OC3/STM1 Clear Channel
Adapter card (with POS encapsulation).
Filter policies must be created before they can be applied to a network interface. Create filter
policies in the config>filter context.
CLI Syntax:
312
sap 1/5/5 create
ingress
filter mac 92
exit
egress
filter ip 10
exit
exit
mesh-sdp 15:5000 create
ingress
filter mac 93
exit
exit
spoke-sdp 15:5001 create
ingress
filter mac 94
exit
exit
no shutdown
config>router# interface ip-int-name
egress
ingress
filter ip ip-filter-id
filter ip ip-filter-id
7705 SAR OS Router Configuration Guide