Configuring Bundle Protection Group Ports - Alcatel-Lucent 7750 Configuration Manual

Configuring Bundle Protection Group Ports

Bundle Protection groups enable APS protection of one bundle residing on a working circuit of an
APS group port by another bundle residing on the protection circuit of that APS group port.
Bundle protection groups apply to MLPPP as well, and are configured the same way. The
following examples show the process to configure BPGrp on ASAP MDAs to provide an APS
protection for an IMA/MLPPP bundle.
First, two ASAP MDAs must be configured.
Example
Configure an APS group with working and protection circuits on the ASAP MDAs.
Example
Create eight ATM DS1 channels on the APS group.
Example: config>port>aps#
7750 SR Interface Configuration Guide
:
config# card 3
config>card# mda 2
config>card>mda# mda-type m4-choc3-as-sfp
config>card>mda# no shutdown
config>card>mda# exit
config>card# exit
config# card 10
config>card# mda 2
config>card>mda# mda-type m4-choc3-as-sfp
config>card>mda# no shutdown
config>card>mda# exit
:
config# port aps-1
config>port# aps
config>port>aps# working-circuit 3/2/1
config>port>aps# protect-circuit 10/2/1
config>port>aps# exit
config>port# no shutdown
config>port# sonet-sdh
config>port>sonet-sdh# path sts1-1
config>port>sonet-sdh>path# no shutdown
config>port>sonet-sdh>path# exit
config>port>sonet-sdh# exit
config>port# tdm
config>port>tdm#
config>port>tdm# ds3 1
config>port>tdm>ds3# channelized ds1
config>port>tdm>ds3# no shutdown
config>port>tdm>ds3# exit
config>port>tdm# ds1 1.1
config>port>tdm>ds1# channel-group 1
config>port>tdm>ds1>channel-group# encap-type atm
Interface Configuration
Page 249