SeeMeCNC Rostock MAX v2 Assembly Manual page 18

Rostock MAX v2 Assembly Guide
(___) 10 each, Plastic Bearing Rollers. 4 are used for mounting the
RAMBo and six are used for the belt clamps.
(___) 12 each, Wire ties. Used for wire management or Barbie
Handcuffs.Your call.
(___) 1 each, GT2 2mm pitch belt pulley pack. Includes six grub screws
and hex wrench.
(___) 3 each, Carriage base for U-Joints. Outer tabs have been removed
to allow for spring clips.
(___) 1 each, Effector Platform (spring clip style).
(___) 6 each, U-Joint Spring Clips.
18