SeeMeCNC Rostock MAX v2 Assembly Manual page 17

Rostock MAX v2 Assembly Guide
Hardware Pack #2
(___) 18 each, 608 Cheapskate Idler Bearing Spacer. Used for belt idlers.
(___) 12 each, 608 Cheapskate Carriage Bearing Spacers (black).
(___) 12 each, 608 Cheapskate Eccentric Bearing Spacers (gray).
Your kit may include Acetal u-joints instead of the machined aluminum
version. In that case you will NOT have the aluminum ones listed below.
(___) 12 each, Universal Joints (Injection Molded Acetal)
(___) 12 each, Universal Joints (machined aluminum).
(___) 6 each, 3-1/8" Steel Universal Joint axle shafts.
(___) 3 each, 1" long machined aluminum hot end platform spacers.
Hardware Pack #3
17