PCU
3.4.4 DEVELOPER REPLACEMENT
The developer replacement procedure is the same for the YMC PCUs and the K PCU.
Preparation
1.
Spread some paper on a flat surface to hold developer that will be dumped from the
development unit.
2.
Remove:
[A] PCU stand from bottom of the machine
[B] Jig
[C] Brown coupling
The PCU stands for the D014/D015/D078/D079 and B132/B200 copiers are
different. Be sure to use the PCU stand for the D014/D015/D078/D079. If you
use the PCU stand for the B132/B200, this could damage the exposed drum
on the bottom of the PCU.
3.
Remove the metal jig [B] and brown coupling [C] from the bottom of the PCU stand.
4.
Set the PCU stand on a flat surface.
5.
Remove:
Toner hopper
Faceplate
PCU
D014/D015/D078/D079
CÓPIA NÃO CONTROLADA
3-46
CÓPIA NÃO CONTROLADA
SM