Sc Codes Group 5: Paper Feed - Ricoh D014 Service Manual

4.2.5 SC CODES GROUP 5: PAPER FEED

Tray 1 (tandem tray) feed error (Japan Only)
The tray 1 lift sensor does not
switch on 10 s after the tray lift
motor switches on and starts
lifting the bottom plate.
SC501 B
When the tray lowers, the tray
lift sensor does not go off
within 1.5 sec.
The lower limit sensor of the
tandem tray does not detect
the lower limit within 10 sec.
Tray 2 (paper cassette) feed error (Japan Only)
The lift sensor is not activated within
10 seconds after the tray lift motor
starts lifting the bottom plate.
When the tray lowers, the tray lift
SC502 B
sensor does not go off within 1.5
sec.
The lower limit sensor of the tandem
tray does not detect the lower limit
within 10 sec.
SM
CÓPIA NÃO CONTROLADA
4-35
CÓPIA NÃO CONTROLADA
Service Call Tables
Tray lift motor harness
disconnected, loose, defective
Paper or other obstacle trapped
between tray and motor
Tray lift sensor disconnected,
damaged
Lower limit sensor disconnected,
damaged
Pick-up solenoid disconnected,
blocked by an obstacle
Tray lift motor defective or
disconnected
Paper or other obstacle
trapped between tray and
motor
Pick-up solenoid disconnected
or blocked by an obstacle
D014/D015/D078/D079