Ricoh D014 Service Manual page 319

To remove the faceplate
1. Rotate the transfer belt release lever [A] counter-clockwise until it stops
2. Disconnect the fan connector [B].
3. Remove the faceplate [C] (
4. Remove the PCU stand from its storage rack under the machine.
5. Place the PCU stand on a flat surface.
6. Wipe the surface of the stand with a clean cloth to remove dust.
To remove a PCU
1. Confirm that the machine is switched off and disconnected from its power source.
SM
CÓPIA NÃO CONTROLADA
x5).
3-13
CÓPIA NÃO CONTROLADA
Common Procedures
D014/D015/D078/D079