Ricoh D014 Service Manual page 140

Counters
6. Route the other end of the short cable to the VBCU below (
7. Connect the short cable to CN223 on the VBCU (
8. Route the harness of the key card through the hole [A] in the controller box as shown
above.
9. Clamp the harness at [B] then connect to the top of the circuit board [C] (
10. Reattach the controller box cover and rear cover.
D014/D015/D078/D079
CÓPIA NÃO CONTROLADA
1-48
CÓPIA NÃO CONTROLADA
x2).
x1).
x1, x1).
SM