Ricoh D014 Service Manual page 446

Firmware Update
If the machine is switched off or accidentally unplugged before the update is
finished, do not remove the SD card. Just switch the machine on again. The
firmware update should restart automatically. If the firmware update does not
recover, obtain a new System SD card.
The following screen sequence appears after selecting one "OpePanel" selected for
update.
Operation Panel Update
The blocks of the progress bar fill as the update is done.
The update requires about 9 to 10 minutes.
When you see the 'update completed' message, the firmware update is complete.
Engine Update
The middle bar tells you the name of the item that you are updating.
The bottom bar shows the progress of the update procedure.
D014/D015/D078/D079
CÓPIA NÃO CONTROLADA
3-140
CÓPIA NÃO CONTROLADA
SM