Number Button Submenu - Ricoh D014 Service Manual

Number button submenu

Press any number button to open the submenu for a part. In the example below, the
number button [001] #K:PCU was pressed.
[A]: Clear current counter. Press to reset the selected PM counter (in this example 001
#K:PCU) to "0". You can also clear the settings by pressing the [Clear] button on the right
side of the PM Counter Main Menu ([F] in the previous section).
[B]: Change target yield. Press the change the target PM yield. To change the setting:
Press [Change target yield]
Enter the number for the new target with the 10-key pad.
Press [#] on the operation panel.
[C]: PM yield indicator settings. [Yes] is the default. Press [No] to remove the current item
from the "Parts list for PM yield indicator".
When set to "Yes", items marked with the # mark (# = a unit) will not have their
individual items
When set to "No", items marked with the # mark (# = a unit) only the individual
components will appear in the list (the units will not appear).
[D]: PM counter history. This is a summary of the most recent counts
Latest 1. The latest PM count since the unit (or part) was replaced.
Latest 2. The previous PM count since the unit (or part) was replaced.
Latest 3. The previous but one PM count since the unit (or part) was replaced.
SM
CÓPIA NÃO CONTROLADA
2-5
CÓPIA NÃO CONTROLADA
PM Counter
D014/D015/D078/D079