Ricoh D014 Service Manual page 855

L:FIN Jobs
These SPs total finishing methods for jobs output from within the document
8066
server mode screen at the operation panel. The finishing method is specified
from the print window within document server mode.
O:FIN Jobs
These SPs total finishing methods for jobs executed by an external
8067
application, over the network. The finishing method is specified by the
application.
Number of jobs started in Sort mode. When a stored copy job is
806x 1 Sort set for Sort and then stored on the document server, the L:
counter increments. (See SP8066 1)
806x 2 Stack Number of jobs started out of Sort mode.
806x 3 Staple Number of jobs started in Staple mode.
Number of jobs started in Booklet mode. If the machine is in
806x 4 Booklet
staple mode, the Staple counter also increments.
Number of jobs started In any mode other than the Booklet mode
806x 5 Z-Fold
and set for folding (Z-fold).
Number of jobs started in Punch mode. When Punch is set for a
806x 6 Punch
print job, the P: counter increments. (See SP8064 6.)
806x 7 Other Reserved. Not used.
T:Jobs/PGS
8071
These SPs count the number of jobs broken down by the number of pages in
the job, regardless of which application was used.
C:Jobs/PGS
8072
These SPs count and calculate the number of copy jobs by size based on the
number of pages in the job.
SM
CÓPIA NÃO CONTROLADA
[0~9999999/ 1]
[0~9999999/ 1]
[0~9999999/ 1]
[0~9999999/ 1]
5-313
CÓPIA NÃO CONTROLADA
Group 8000
D014/D015/D078/D079