Table of Contents
Advertisement
DEVELOPMENT
3.11.4 DEVELOPER
G065R404.WMF
1. Development unit (☛ 3.11.1)
2. Remove the development roller (☛ 3.11.3)
3. Tip out the old developer [A]
4. Turn drive gear [B] to ensure that no developer remains in the unit or on the
developer roller.
NOTE: Dispose of the used developer in accordance with local regulations.
Work carefully to avoid scratching or nicking the development roller.
5. Pour approximately 1/3 of the developer [C] evenly along the length of the
development unit.
6. Rotate the drive gear [D] to work the developer into the unit. Repeat [C] and [D]
until all toner is in the unit and level with the edges.
[B]
[A]
[C]
3-24
6 November, 2001
[D]
G065R405.WMF
Advertisement
Table of Contents
