Ricoh D014 Service Manual page 792

Group 6000
6111 Booklet Fold Repeat
This SP sets the number of times the folding rollers are driven forward and
reverse to sharpen the crease of a folded booket before it exits the folding unit.
When set at the default (0):
The folding blade pushes the center of the stack into the nip of the folding
roller.
The folding rollers rotated ccw to crease the booklet, reverse cw, then rotate
ccw again crease the booklet fold twice before feeding to the folding unit exit
rollers.
1 A3 SEF
2 B4 SEF
3 A4 SEF
4 B5 SEF
5 DLT SEF
6 LG SEF
7 LT SEF
8 12"x18"
9 Other
6114 Free Run DFU
These SPs set the switch the following free run modes for Finisher 2 (B830).
Touch [ON] to switch on, [OFF] to switch off.
1 Free Run 1
2 Free Run 1
3 Free Run 3
4 Free Run 4
D014/D015/D078/D079
CÓPIA NÃO CONTROLADA
2000-Sheet Finisher D373
[0 to 6/0/1]
0: No repeated fold
1: 2
2: 5
3: 10
4: 15
5: 25
6: 30
3000-Sheet Finisher B830
System Free Run
Free Run (Endurance Testing)
Free Run
Shift, Free Run
5-250
CÓPIA NÃO CONTROLADA
Rev. 09/24/2009
SM