Ricoh D014 Service Manual page 729

5812 Service Tel. No. Setting
1 Service
2 Facsimile
3 Supply
4 Operation
5816 Remote Service
1 I/F Setting
2 CE Call
3 Function Flag
Device
6 Information Call
Display
SM
CÓPIA NÃO CONTROLADA
Inputs the telephone number of the CE (displayed when a
service call condition occurs.)
Use this to input the fax number of the CE printed on the Counter
Report (UP mode). Not Used
Displayed on the initial SP screen.
Allows the service center contact telephone number to be
displayed on the initial screen.
Turns the remote diagnostics off and on.
[0 to 2/1]
0: Remote diagnostics off.
1: Serial (CSS or NRS) remote diagnostics on.
2: Network remote diagnostics.
Lets the customer engineer start or end the remote
machine check with CSS or NRS; to do this, push the
center report key.
Enables and disables remote diagnosis over the NRS
network.
[0 to 1/1]
0: Disables remote diagnosis over the network.
1: Enables remote diagnosis over the network.
Controls if the item for initial setting of the screen for the
NRS device-information notification-call is shown.
[0 to 1/1]
0: Enabled. Item initial setting not shown.
1: Disable. Item for initial setting shown.
5-187
CÓPIA NÃO CONTROLADA
Group 5000
D014/D015/D078/D079