Service Call Tables
SC687
Memory address command error
The VBCU does not receive a
memory address command
B
from the controller 120
seconds after paper is in the
position for registration.
4.2.7 SC CODES GROUP 7: PERIPHERALS
ARDF original pickup operation error
SC701
D
Even though the pickup motor is rotating clock-wise, the pickup roller
home position sensor cannot detect the position of the pickup roller.
Pickup roller HP sensor harness loose, disconnected, defective
Pickup roller HP sensor defective
Pickup motor harness loose, disconnected, defective
Pickup motor defective
ARDF control board defective
ARDF bottom plate lift motor
The bottom plate HP sensor did not detect the home position of the
bottom plate after the bottom plate lift motor switches on and lowers the
SC705
D
bottom plate.
The bottom plate position sensor does not detect the position of the plate
after the lift motor switches on and raises the bottom plate.
ARDF feed motor disconnected, defective
Bottom plate HP sensor disconnected, defective
ARDF main board defective
D014/D015/D078/D079
CÓPIA NÃO CONTROLADA
4-52
CÓPIA NÃO CONTROLADA
Turn the machine power off/on
Check the controller board
connections
Controller defective
Rev. 01/2009
SM