Reassembling The Belt Unit And Belt Cleaning Unit3-78; Before You Begin - Ricoh D014 Service Manual

Image Transfer Unit
3.6.3 REASSEMBLING THE BELT UNIT AND BELT CLEANING
UNIT

Before You Begin...

Here are some important precautions you should obey when reassembling the ITB Unit.
When you install the new belt, the edge of the belt with the encoder film strip must be
at the back of the unit with the image position sensor. The encoder edge of the ITB is
silver.
Never touch the ITB rollers when removing/installing the belt. If a roller (or the surface
of the belt) is touched accidentally, moisten a clean cloth and clean the affected area.
D014/D015/D078/D079
CÓPIA NÃO CONTROLADA
3-78
CÓPIA NÃO CONTROLADA
SM