Ricoh D014 Service Manual page 196

SR 5000 (B830) Finisher Installation
5. Install the ground plate [A] (
Set the ground plate so that there is no gap between the plate and the bottom frame of
the finisher (as shown).
6. Install the table extension [B] (
The edge of the table extension should be aligned with the edge of the finisher.
7. Attach the cushion [C] to the right side of the upper cover.
8. Install the entrance guide plate [D] (
9. Insert the shift tray [A] into the grooves and fasten it (
D014/D015/D078/D079
CÓPIA NÃO CONTROLADA
x 2) (M3 x 6).
x 2) (M4 x 8).
x 2) (M3 x 6).
1-104
CÓPIA NÃO CONTROLADA
x 4) (M3 x 6).
SM