Punch Unit (B702)
1.11.2 INSTALLATION
Always turn the machine off and disconnect the machine power cord before you
do this procedure.
1.
If the finisher is connected to the copier, disconnect the power connector [A] and move
the finisher away from the copier.
2.
Remove the rear cover [B] (
At the bottom of the rear cover, make sure to disconnect the tabs that attach
the cover to the frame.
3.
Remove the guide plate [C] (
4.
Remove the shipping retainer [A] (
D014/D015/D078/D079
CÓPIA NÃO CONTROLADA
x 2) and open the front door.
x 2).
x 4).
1-86
CÓPIA NÃO CONTROLADA
SM