Ricoh D014 Service Manual page 943

Acronym
Vsg after checking the bare surface of the ITB by the direct reflection ID
Vsg_reg
sensor.
Vsp ID sensor output from the most recent ID sensor pattern.
Vt TD sensor output at the present time.
Gain value calculated during TD sensor initialization. This is used to adjust
the Vt (TD sensor output). A large gain increases Vt, and a small gain
Vtcnt
decreases it. The result of this calculation is also used to calibrate Vt during
TD sensor initialization.
Target output of the TD sensor. The machine always tries to adjust the toner
Vtref
WT% in the developer to bring Vt closer to Vtref.
1
* Adjustment done for each color Y, M, C, K
SM
CÓPIA NÃO CONTROLADA
Description
6-39
CÓPIA NÃO CONTROLADA
Process Control
D014/D015/D078/D079