Ricoh D014 Service Manual page 86

Differences Between the D014/D015 & B132/B200
7. Fusing Unit. The fusing unit is new.
There is a new lock arm at the back of the unit that must be released before the fusing
unit can be removed. Disassembly of the fusing unit is much easier. Important: There
are two fusing units: a 120V unit and 240 V unit.
The fusing lamp connectors of the 120V unit are BLUE, those of the 240V unit are
PINK.
If the wrong type of fusing unit is installed in the machine, the machine will detect this
and issue a warning. There is no danger of damaging either the fusing unit or main
machine.
The B132/B200 and D014/D015 fusing belts are not interchangeable. The D014/D015
belt is longer.
8. Boards. The layout of the main boards has changed.
There is no motherboard.
The AC boards of the 120V and 240V machines are different. The boards are clearly
marked "100V" or "200V" in the center of the board to prevent installing the wrong type
of board.
The controller board must be removed before the IPU/VBCU boards can be removed.
9. HDD Removal
The HDD must be reconnected correctly. If the HDD is connected incorrectly, the machine
will issue an HDD error at power on. This will not harm the HDD or corrupt data on the disk.
Just power the machine off and reconnect the HDD correctly.
10. Motors
Drum motor replacement is much easier (a jig is no longer required to lock the motor
shaft.)
The development motor and drum cleaning motor can be removed separately.
The position of the paper transfer motor has changed.
The shape of the image transfer motor has changed.
D014/D015/D078/D079
CÓPIA NÃO CONTROLADA
D- 48
CÓPIA NÃO CONTROLADA
SM