Ricoh D014 Service Manual page 863

number of pages fed for duplex front side scanning. (The front side
is determined by which side the user loads face up.)
Number of rear sides fed for scanning. With an ADF that can scan
both sides simultaneously, the Back count is the same as the
2 Back number of pages fed for duplex scanning. With an ADF that cannot
scan both sides simultaneously, the Back count is the same as the
number of pages fed for duplex rear-side scanning.
When 1 sheet is fed for duplex scanning the Front count is 1 and the Back count is 1.
If a jam occurs during the job, recovery processing is not counted to avoid double
counting. Also, the pages are not counted if the jam occurs before the first sheet is
output.
Scan PGS/Mode
8231
These SPs count the number of pages scanned by each ADF mode to
determine the work load on the ADF.
1 Large Volume
2 SADF
3 Mixed Size
4 Custom Size
5 Platen
If the scan mode is changed during the job, for example, if the user switches from ADF
to Platen mode, the count is done for the last selected mode.
The user cannot select mixed sizes or non-standard sizes with the fax application so if
the original's page sizes are mixed or non-standard, these are not counted.
If the user selects "Mixed Sizes" for copying in the platen mode, the Mixed Size count
SM
CÓPIA NÃO CONTROLADA
Selectable. Large copy jobs that cannot be loaded
in the ADF at one time.
Selectable. Feeding pages one by one through
the ADF.
Selectable. Select "Mixed Sizes" on the operation
panel.
Selectable. Originals of non-standard size.
Book mode. Raising the ADF and placing the
original directly on the platen.
5-321
CÓPIA NÃO CONTROLADA
[0~9999999/ 1]
D014/D015/D078/D079
Group 8000