Common Procedures
3.2.11 OPENING, LOCKING THE CONTROLLER BOX COVER
To prevent personal injury and damage to the controller box, when the controller
box is open, it should always be locked as described below. Before doing the
procedure, always switch the machine off and disconnect the power cord.
1.
Turn off the main power switch and disconnect the power cord.
2.
Remove the rear covers.
3.
Remove controller box screws
4.
Open the controller box [A] to the left until it stops.
Obey the warning on the decal to avoid touching the fan blades when you
open and close the controller box.
5.
Remove the left screw [B].
6.
Rotate the plastic stopper [C] counter-clockwise until it is aligned with the hole below
and its tip [D] is touching the machine frame.
7.
Reattach the screw removed in Step 5 to lock the arm in position.
Reinstallation
Before closing the controller box, reattach the stopper arm at its original position.
D014/D015/D078/D079
CÓPIA NÃO CONTROLADA
, , .
3-22
CÓPIA NÃO CONTROLADA
SM