Ricoh D014 Service Manual page 641

3101 ID Pattern:Display
ID Sensor Pattern Coverage Display.
Displays the amount toner to be used (coverage) to create the ID sensor
patterns between pages. The ID sensors cannot accurately detect the patterns
if there is too much reflectivity from the black toner. This SP changes the solid
ID sensor pattern to a hatched pattern.
Note: SP3101-1 to 4 sets detection and update timing for the creation of the ID
sensor patterns.
1 Applied:K
2 Applied:M
3 Applied:C
4 Applied:Y
5 Target Apply:K
6 Target Apply:M
7 Target Apply:C
8 Target Apply:Y
3102 ID Pattern:Int
These SP patterns set the time interval for creation of the ID sensor pattern on
the drum.
1 Create Int:K
2 Create Int:M
3 Create Int:C
4 Create Int:Y
5 K Page Cnt
SM
CÓPIA NÃO CONTROLADA
[0 to 200/10/ 1 page]
[0 to 200/0/ 1 page]
5-99
CÓPIA NÃO CONTROLADA
Group 3000
D014/D015/D078/D079