Ricoh D014 Service Manual page 531

Rev. 05/2008
⇒
HDD mail receive data error
SC872 B
⇒
HDD mail send data error
An error is detected on the HDD immediately after the machine has been
turned on, or power has been turned off while the machine has used the
SC873 B
HDD.
1. Do SP5832-008 (Format HDD – Mail TX Data) to initialize the HDD.
2.
Delete All error 1: HDD *GW
A data error was detected for the
HDD/NVRAM after the Delete All
SC874 D
option was used.
Note: The source of this error is the
Data Overwrite Security Unit running
from an SD card.
Delete All error 2: Data area *GW
An error occurred while the machine
deleted data from the HDD.
SC875 D
Note: The source of this error is the
Data Overwrite Security Unit D377
running from an SD card.
SM
CÓPIA NÃO CONTROLADA
The machine detects that the HDD is not operating correctly at power
on.
The machine detects that the HDD is not operating correctly (can
neither read nor write) while processing incoming email.
HDD defective
The machine is turned off while the HDD is being accessed.
Do SP5832-007 to format the mail RX data on the HDD.
Replace the HDD
CÓPIA NÃO CONTROLADA
Turn the main switch off/on
and try the operation again.
Install the Data Overwrite
Security Unit again.
HDD defective
Cycle the machine off/on.
Try the operation again.
4-81
Service Call Tables
D014/D015/D078/D079