Ricoh D014 Service Manual page 655

3551 Set Procon:Job End
This SP sets timing of the process control self-check for job end. The process
control self-check never interrupts a job to execute, even if it is time for the
next self-check.
1 B/W Mode
2 Color Mode
3 Pg Cnt:B&W Mode
4 Pg CntColor Mode
3552 Set Procon:Interrupt
These SP codes settings determine whether a long print job is interrupted
temporarily in order to execute process control. (Normally long print jobs are
not interrupted for process control unless these settings are changed.)
1 B/W Mode
2 Color Mode
3 Pg Cnt:B&W Mode
4 Pg Cnt:Color Mode
SM
CÓPIA NÃO CONTROLADA
This SP sets the page interval for execution of
process control at job end for monochrome
printing.
[0 to 5000/250/1]
This SP sets the page interval for execution of
process control at job end for color printing.
[0 to 5000/250/1]
Displays the current page interval counts for the
execution of process control execution for both
monochrome and color printing.
[0 to 5000/0/1]
Sets the page interval to trigger process control during a
long monochrome print job.
[0 to 2000/0/ 1 sheet]
Sets the page interval to trigger process control during a
long color print job.
[0 to 1000/0/ 1 sheet]
Displays the current page counts that will interrupt long
monochrome or color print jobs in order to execute
process control.
[0 to 5000/ 0/ 1 sheet]
5-113
CÓPIA NÃO CONTROLADA
Group 3000
D014/D015/D078/D079