PCU
3.4.2 SEPARATING DRUM/CLEANING UNIT, REMOVING THE
OPC DRUM
Before doing maintenance on a PCU:
Separate the development unit and cleaning unit.
Remove the drum and cover it with a sheet of clean paper to protect it from light.
1.
Remove:
PCU
Charge roller unit (or charge wire unit for K PCU)
2.
At the front, remove:
[A] Small lock plate (
[B] Large lock plate (
3.
At the rear, remove:
[C] Small lock plate (
[D] Brown coupling
[E] Large lock plate (
4.
Separate the drum unit [F] from the development unit [G].
D014/D015/D078/D079
CÓPIA NÃO CONTROLADA
x1)
x2)
x1)
x3)
3-36
CÓPIA NÃO CONTROLADA
SM