Preparing For Docking - Ricoh D014 Service Manual

Preparing for Docking

1. Remove the tape from the sponge [A] and attach it to the Z-folding unit.
2. Remove the top cover [A] (
3. Remove the seal from the double-sided tape on the bottom of the front spacer [B], then
attach it.
4. Remove the seal from the double-sided tape on the bottom of the rear spacer [C], then
attach it.
5. The spacers align the top of the Z-folding unit with the edge of the copier.
6. Reattach the top cover [A] (
7. Make sure that the top cover is level with the tops of the rear and front spacers.
SM
CÓPIA NÃO CONTROLADA
x 4).
x 4).
1-141
CÓPIA NÃO CONTROLADA
Z-Folding Unit ZF4000 (B660)
D014/D015/D078/D079