Ricoh D014 Service Manual page 649

3411 TNE Detect Disp/Set
This SP sets the number of pages to print after the toner near-end alert has
been issued.
1 TNE:K Sheets
2 TNE:YMC Sheets
3 K Pg Count
4 M Pg Count
5 C Pg Count
6 Y Pg Count
7 Disp Timing:K
8 Disp Timing:M
9 Disp Timing:C
10 Disp Timing:Y
3412 TE Detect:Disp/Set
These SP codes determine how many pages print before toner supply reaches
toner end.
1 TE:Sheets:Min:K
2 TE:Sheets:Min:Col
3 TE:Sheets:Max:K
4 TE:Sheets:Max:Col
SM
CÓPIA NÃO CONTROLADA
Sets toner end to be measured by the number of
sheets printed (toner end sensor input is ignored).
[0 to 30/ 1 Sheet]
Displays the number of continuous sheets detected
for toner end while the toner end sensor input is
ignored.
[0 to 30/ 1 Sheet]
This setting displays the percentage of toner
remaining for toner near end.
[0 to 100/ 1%]
These SPs set the minimum number of
monochrome and color pages guaranteed to
print after the machine has determined near
end until the toner-end message is displayed.
[0 to 50 / 10/ 1 Sheet]
These SPs set the maximum number of
pages for monochrome and color guaranteed
to print after the machine has determined
near end until the toner-end message is
displayed.
5-107
CÓPIA NÃO CONTROLADA
Group 3000
D014/D015/D078/D079