Ricoh D014 Service Manual page 507

Upper Tray Junction Gate Motor: 3K Finisher B830
The upper tray junction gate
HP sensor did not detect the
gate at the home position
within 200 ms after two
SC734 B
attempts.
-or-
The HP sensor twice detected
the gate at the home position
for more than 200 ms after it
was supposed to open.
Staple Junction Gate Motor Error: B830
The staple tray junction gate
HP sensor did not detect the
gate at the home position
within 200 ms after two
SC735 B
attempts.
-or-
The HP sensor twice detected
the gate at the home position
for more than 200 ms after it
was supposed to open.
SM
CÓPIA NÃO CONTROLADA
4-57
CÓPIA NÃO CONTROLADA
Service Call Tables
Junction gate did not arrive at the
home position within the specified
time
Junction gate did not leave the
home position within the specified
time
Junction gate did not arrive at the
home position within the specified
time
Junction gate did not leave the
home position within the specified
time
D014/D015/D078/D079