Ricoh D014 Service Manual page 514

Service Call Tables
Finisher folder plate motor error (D373)
The folder plate moves but is
not detected at the home
position within the specified
SC761 B
time. The 1st detection failure
causes a jam error, and the
2nd failure causes this SC
code.
Punch movement motor error
Occurs during operation of the
SC763 D
punch unit. The 1st detection failure
causes a jam error, and the 2nd
failure causes this SC code.
Paper position sensor slide motor error
Occurs during operation of the
SC764 D
punch unit. The 1st detection failure
causes a jam error, and the 2nd
failure causes this SC code.
Fold Unit Bottom Fence Lift Motor Error (D373)
The fold unit bottom
fence did not return to
SC765 D
the home position
within the specified
time.
D014/D015/D078/D079
CÓPIA NÃO CONTROLADA
Folder plate HP sensor disconnected,
defective
Folder plate motor disconnected,
defective
Folder plate motor overloaded due to
obstruction.
Fold bottom fence mechanism overloaded
due to an obstruction
Fold bottom fence HP sensor connector
loose, broken, defective
Fold bottom fence HP sensor defective
Fold bottom fence lift motor connector
loose, broken, defective
Fold bottom fence lift motor defective
Main control board defective
4-64
CÓPIA NÃO CONTROLADA
Motor harness disconnected,
loose, defective
Motor defective
Motor harness disconnected,
loose, defective
Motor defective
SM