Load The Paper Trays - Ricoh D014 Service Manual

You must close the front door.
4. Wait for the machine to warm up and enter standby mode.
5. Enter the SP mode and do 3811-1 to send toner to the PCUs and initialize the TD
sensor. This requires about 4 min.
If 'Failed' appears immediately after you start SP3811-1, the machine has not
warmed up. Wait 2 minutes, and then do SP3811-1 again.
Do SP3811-1 only once.
Executing SP3811-1 more than once can cause toner spill inside the machine.
SP3811-1 initializes not only the TD sensor but initializes the developer as
well.
Never do SP3801-1 after doing SP3811. If the TD sensor is initialized twice
this will cause a fatal error in toner supply control.
6. When the message tells you that the initialization is completed, touch [Close].
7. Do SP3812-1 to confirm that SP3811-1 executed correctly.
If you see "1111" (K M C Y), this means SP3811-1 executed correctly.
If you see any number other than "1111", this means an error. (See SP3812
Errors.)
For a complete list of errors and how to solve problems related to SP3812,
please refer to "4.2.3 SP3812 001 (DevSetup Execute) Errors" of the
Venus-C1 B132 Service Manual.
8. Do SP 3821-1 to check that process control was completed successfully.
For each color, there is a two-digit code, in the order K,M,C,Y. '10' means that
process control was completed successfully. '10101010' means that all 4 colors
completed process control successfully.

Load the Paper Trays

For each paper cassette tray:
1. Move the side fence and bottom fence to the correct positions for the paper.
2. Add paper to the trays.
3. Attach the paper size decals to the front of the paper cassette trays and the tandem
tray.
SM
CÓPIA NÃO CONTROLADA
1-27
CÓPIA NÃO CONTROLADA
Copier D014/D015/D078/D079
D014/D015/D078/D079