Seal Check And Removal - Ricoh D014 Service Manual

MFP Controller Options

Seal Check and Removal

1. Check the two box seals [A] on the corners of the box and confirm that they are firmly
attached.
If you see "VOID" on the tapes or on the corners of the box this means that the
seals have been removed. If the "VOID" notations are visible, do not use the
SD card for this installation. Contact your sales division
2. Remove the seals from both corners of the box. The silver "VOID" notations [B]
become visible only after you have removed the seals. This is normal.
D014/D015/D078/D079
CÓPIA NÃO CONTROLADA
VOID VOID VOID VOID VOID
VOID VOID VOID VOID VOID
VOID
VOID VOID VOID VOID
1-172
CÓPIA NÃO CONTROLADA
VOID VOID VOID
VOID VOID VOID
VOID
VOID VOID
SM