Ricoh D014 Service Manual page 669

3802 TD Sn Init OK?
This SP displays the results of the TD sensor initialization with SP3801 001 to
006. The machine returns the status of the previous initialization with numbers,
1 digit for each PCU. The numbers are read in order as "K, M, C, Y".
Four numbers are used to indicate the status of the execution.
1: OK (success)
2: Cancelled (door opened, etc.)
4: Not executed (not selected for execution; this is not an error)
9: Vtcnt abnormal. Vtcnt (TD sensor control voltage) could not be adjusted to
within 2.5 ±0.2V. The machine issued a TD sensor error for the PCU where
there is a problem (SC372 to SC375).
Note!: The "1111" display is read from left to right: KMCY.
3810 ClngInitSetExe
These SPs should be executed after replacement of the drum cleaning roller or
drum cleaning blade.
1 All Colors
2 Col
3 K
4 M
5 C
6 Y
7 A3 Page Cover
SM
CÓPIA NÃO CONTROLADA
Y, M, C, K
Excludes Black (Y, M, C only
Sets the number of sheets for A3 coverage to prevent
scouring of the OPC drum.
[0 to 100/ 3/ 1 sheet]
5-127
CÓPIA NÃO CONTROLADA
Group 3000
D014/D015/D078/D079