Punch Unit B831
[A]
11. Position the 2 mm spacer [A] and attach the punch unit [B] (Screw x 2, M3 x 10).
12. Use one of the screws removed from the motor protector plate to fasten the remaining
two spacers to the frame as shown.
These extra spacers can be used to adjust the position of the punch holes (front to rear,
across the page).
13. At the front, fasten the punch unit knob [C] (Screw x 1).
D014/D015/D078/D079
CÓPIA NÃO CONTROLADA
[B]
B831I105.WMF
1-114
CÓPIA NÃO CONTROLADA
Rev. 03/2008
B831I108.WMF
[C]
SM