Fusing Lamp Rearrangement In The Heating Roller - Ricoh D014 Service Manual

Fusing Lamp Rearrangement in the Heating Roller

The layout of the fusing lamps has been rearranged to ensure a more efficient distribution of
heat.
In the Heating Roller:
Lamp heats the entire length of the fusing belt.
Lamp heats only the ends of the fusing belt. (Used only for large paper sizes.)
Lamp heats only the center of the fusing belt. (Used for smaller, thick paper sizes;
lamp is not used.)
This allows better control of the heat applied to the fusing belt, based on the requirements of
the paper size and paper type selected for the job.
SM
CÓPIA NÃO CONTROLADA
Differences Between the D014/D015 & B132/B200
D-9
CÓPIA NÃO CONTROLADA
D014/D015/D078/D079