Ricoh D014 Service Manual page 486

Service Call Tables
Tray 1 feed error
The lift sensor is not activated
within 10 seconds after the tray lift
motor starts lifting the bottom
SC503 B
plate.
When the tray lowers, the tray lift
sensor does not go off within 1.5
sec.
Tray 2 feed error
The lift sensor is not activated
within 10 seconds after the tray lift
motor starts lifting the bottom
SC504 B
plate.
When the tray lowers, the tray lift
sensor does not go off within 1.5
sec.
Tandem tray rear fence motor error
The return sensor does not
switch on within 10 sec. after
the rear fence motor switches
on.
SC505 C
The HP sensor does not
switch on 10 sec. after the
rear fence motor switches on.
The HP sensor and return
sensor switch on at the same
time.
D014/D015/D078/D079
CÓPIA NÃO CONTROLADA
4-36
CÓPIA NÃO CONTROLADA
Tray lift motor defective or
disconnected
Paper or other obstacle trapped
between tray and motor
Pick-up solenoid disconnected
or blocked by an obstacle
Tray lift motor defective or
disconnected
Paper or other obstacle trapped
between tray and motor
Pick-up solenoid disconnected
or blocked by an obstacle
Rear fence motor defective or poor
connection
Paper or other obstacle interfering
with operation of the sensors
Paper or other obstacle trapped
between tray and motor
Motor mechanical overload due to
obstruction
Return sensor or HP sensor
defective or dirty
SM